2-phase soft starter VersiStart II plus expanded - Now from 6-105 A
PETER electronic is expanding the 2-phase controlled soft starter VersiStart II plus product family with two additional sizes. The proven soft starter series with high duty cycle now offers a continuous range of 6 A - 105 A.
The soft starters are known for optimal starting and stopping properties with high-quality protective functions in a particularly robust housing. The product family offers a high degree of flexibility for power ranges from 3 to 55 kW.
2-phase soft starters for maximum range and performance
The VersiStart II plus series (6 - 105 A) impresses with comprehensive motor protection functions and a high duty cycle. This allows users to carry out several start-up cycles within a very short time. The motor is safeguarded by the comprehensive, integrated protective functions and even allows heat sink temperature monitoring for devices from 38 - 105 A.
Using constant calculations of thermal images, the associated motor can be automatically switched off and the circuit interrupted in overload phases to ensure maximum safety for the motor and soft starter.
In addition, the soft starter VersiStart II plus (38 - 105 A) takes on a number of other useful protection tasks, such as the diagnosis of undervoltage in the electronic supply, overheating, phase and ignition errors and other problems.
Naturally, the small VersiStart II plus soft starters have a compact design and can be attached to a 35 mm standard rail by simply snapping them on (6 - 65 A). In contrast, higher outputs of the VersiStart II plus soft starter series (80-105 A) can be mounted on a 35 mm and 75 mm standard rail or directly using screws.
The smaller devices also enable easy commissioning and operation. - "Plug and play" for quick integration into existing control cabinets or individual housings.
2-phase soft starter - flexible areas of application
The most common areas of application include pumps, fans, packaging machines, conveyor systems and gate and door drives. The current and torque reductions achieved during startup protect the motor from both an electrical and mechanical aspect and ensure long-lasting system operation. The robust soft starter is extremely flexible and displays ideal, application-oriented behavior in all operating states. The starting and stopping behavior can be individually configured using the settings controller, including entering the starting voltage.
The most important features at a glance:
The 2-phase soft starter VersiStart II plus (6 - 105 A) is equipped with comprehensive functions for soft starting, motor and system protection and is therefore ideal for a wide range of motors and applications.
The preferred areas of application are:
- Electric pumps
- Heat pumps
- Vacuum pumps
- Fans and ventilators
- Traveling cranes
- Extraction systems
- Compressors
- Agitators
- Centrifuges
- Saws
- Conveyor systems
- Woodworking machinery
- Grinding machines
- Textile machines
- Packaging machines
- Printing machines
The 2-phase soft starters are equipped with the following functions:
- Soft start and soft stop
- Current and torque reduction when starting
- Selectable boost start
- 3 separately adjustable parameters
- Starting time, starting voltage, stopping time
- Potential-free control input for soft start and soft stop
- Potential-free signaling relay output (closed when motor is running)
Other features:
- Microcontroller operated
- Protection class IP20
- Soft starter with two-phase control
- Optimized soft start
- Integrated bypass relay
- No grid- and neutral conductor (N) required
- Cost-effective replacement for star/delta switches
- Push-in terminals for the control contacts
- Heat sink temperature monitoring (38-105 A)
- Compact design, 55 mm up to 65 A and 81 mm up to 105 A
- Easy installation by snapping onto 35 mm standard rails (6-65 A devices) 35 mm/75 mm standard rails (80-105 A devices) or directly mountable
Further details in our online shop:
VersiStart II plus [38 - 105A]
Visit online shopVersiStart II plus [6 - 32A]
